Anand Oil

Oil 10 W 30 Engine Oil

These oils are recommended for naturally aspirated, supercharged and turbocharged diesel engines, high powered gasoline engines and mixed fleet operation.

Oil CF-4 15W 40 Engine Oil

Recommended for all types of diesel powered vehicles ranging from light commercial vehicles to heavy duty turbo charged diesel engines and also suitable for off-highway equipment and power generation sets operating on high speed diesel

Oil 20W 40 Engine Oil

For use in Modern passenger cars naturally aspirated diesel engines operating under severe conditions and also in supercharged diesel engines and also in vehicles encountering continuous start-stop operation.

Oil 20W 50 Engine Oil

These oils are recommended for modern passenger cars, naturally aspirated diesel engines operating under severe conditions, supercharged diesel engines and vehicles encountering continuous start-stop operation.

Oil 80W 90 Gear Lubricants

These oils are special multigrade heavy duty hypoid gear oils and are primarily recommended for the lubrication of hypoid differential units operating under severe conditions and other types of mechanical transmissions and drive axles where extreme pressure gear oils are required. It is deal for vehicles operating in areas where ambient temperatures vary widely.

Oil C-600 Lubricating Oil, Gear Compounded

For use in vehicle transmissions, general gear applications and chassis lubrication operated over the product temperature range above 0OC. This lubricant is not suitable for use with hypoid gears, in automatic transmissions or torque converter drives.

Gear Oil SAE 140 Heavy Gear Oil

Oil is recommended differentials / axles of heavy commercial vehicles

Grease SG 240 Greases

It is recommended for wheel bearings and various other automotive grease applications which are not exposed to moisture. High quality grease specially developed for defence applications. Anand Grease SG 240 meets IS: 10647: 1983 (1998) Specifications:

TYPICAL CHARACTERISTICS

S N

PROPERTIES

Grease SG 240

1.

Appearance

Dark brown in the Film, Smooth & Homogeneous

2.

Type of Soap

Sodium

3.

Consistency of the grease, @ 25 0.5 °C, 0.1 mm units, Unworked

2

4.

Worked, 60 strokes, Min.
Worked, 60 strokes, Max.

Shall not differ by more than 25
units frorr 50 strokes.

250

280

5.

Worked, 100000 strokes

Shall not differ from worked 60 X
by more than 25 units.

6.

Drop point, °C, Min.

180

Grease XG-279 Grease, Automotive and Artillery

Grease used for general purpose and lubricant for automotive and artillery applications, over the temperature range minus 54OC to plus 105OC

Grease LG-280 Greases

For certain marine applications where the uses of water – resistant grease are required as a lubricant and / or corrosion preventive and also used for submarine stern tube shaft glands.

Grease Gem-3 Greases

It is excellent multipurpose grease suitable for all automotive grease applications. It meets IS: 12203: 1987

Grease RR-3 Greases

Provides superior wear protection to the various parts of the joint such as the axis pin, ball hub, balls and ball casing

DAFC 30% Radiator Coolant

Cooling Fluid contains both water and coolant. The coolant portion consists of a green fluid that contains ethylene glycol 30% for more severe weather.

DAFC 50% Radiator Coolant

Cooling Fluid contains both water and coolant. The coolant portion consists of a green fluid that contains ethylene glycol 50%

Additive Diesel Additive

To enhance fuel consumption capacity

Anti Seize ZX- 13 Anti-Seize Compound, Graphite

Anti seize compound for threaded fittings at temperature up to 500OC. It may also be used where an electrical conductor is required. This product should not be used as an engineering lubricant.

CS SAE 30 Engine Oil and Brake Oil

Applications include maintenance equipment, tractors, lawn and garden equipment, generators, compactors, pumps, light towers, welders, log splitters, power washer, cement mixer and trowels, skid-steers, excavators and compressors.

Corrosion Preventive chemicals

Prevention from heat, moister effect

DAFC 60% Indigenous Engine Coolant

Cooling Fluid contains both water and coolant for heavy vehicle radiator

Gear Ciatim-201 Synthetic Grease

Instrument grease is applied in friction and frictionless bearings, gear drives, aeromechanics control system.

Grease XG 271 General Purpose Grease

The Long life General purpose lubrication of high speed ball bearing, roller bearings, plain bearings, internal combustion engine accessories, and certain fire control instruments used for aviation and shipping and it is also suitable for use in harsh environment for operating temperature range minus 40°C to plus 120°C.

XG - 267 Heavy MP Grease

Recommended for use in heavily loaded sliding mechanisms and anti frictions bearings and splinted shafts (-75OC to 120OC)

Grease XG 240 Graphite Grease

Intended for use in highly loaded anti-friction bearings, gears, and actuator as well as instruments, high speed bearings (though not recommended for wheel bearings)

Grease XG 287 Multi Purpose Grease

Multipurpose grease for the lubrication of gearboxes, anti-friction bearings, plain bearings and other mechanisms over the temperature range minus 73⁰C to plus 120^OC, and where satisfactory performance in the presence of water contamination is required

Grease XG 285, Aircraft: Graphite

Graphite grease specifically used as a lubricant in heavily loaded intermittent applications, such as aircraft combustion starter gear and slow moving plain bearings and sliding surfaces, over the operating temperature range minus 40^OC to plus 120^OC.

Grease XG 340, Grease cum Preservative

Used for lubrication of small arms and certain other equipment as well as for rust proofing.

VG 32 Hydraulic Oil

Anand Oil Hydraulic Oil VG 32 oils are recommended for general purpose hydraulic oil applications.

HLP VG 15 Hydraulic Oil (Extra heavy duty hydraulic oil)